product

You Are Here: home - product - PE

PE

Features:

Carbon fiber spokes have higher stiffness and higher tensile strength, and the lateral response is 7% higher than that of the same steel spokes, and the high frequency vibration absorption capacity of carbon spokes is stronger than that of steel spokes. It can provide better aerodynamics and excellent stability, allowing you to have an advantage in full sprint and high-power climbing.

Size:

  • 40mm wheelset
  • 50mm wheelset

Quick Details

  • Brand Name:

    Elitewheels
  • Series:

    PE
  • Size:

    700c
  • Height:

    40&50mm
  • Inner width:

    19.5mm
  • Outer width:

    29mm
  • Spoke Hole:

    F18-R21
  • Finishing:

    UD fiber
  • Warranty:

    3 years

Product details

1500.jpg

Aero carbon spoke

Carbon fiber spokes have higher stiffness and higher tensile strength, and the lateral response is 7% higher than that of the same steel spokes, and the high frequency vibration absorption capacity of carbon spokes is stronger than that of steel spokes.It can provide better aerodynamics and excellent stability, allowing you to have an advantage in full sprint and high-power climbing.

图3.jpg

Ceramic Bearings

Both front and rear hubs use S&S ceramic bearings,ceramic bearings further increase hub rolling efficiency with lower rolling resistance.At the same time, the non-driving side of the front and rear hubs have bearing pre-tightening side covers.

图6.jpg

Performance hub

The front and rear hubs use 6902 bearings. The larger the bearing, the better the rigidity. On the premise of ensuring the performance output of the hub, we try to reduce the weight on the hub body and minimize the rolling resistance.

The  hub uses 18 spokes on the front wheel,  The rear hub has 21 spokes, 14 on the drive side and 7 on the non-drive side.

After 6 months of continuous design and continuous improvement, we have found the best geometric angle of the hub so that the spoke tension on the driving side is the same as the tension on the non-driving spoke side, which is very important. In this way, the stability of the wheels can be improved to a greater extent when entering a curve quickly.

详1.jpg

Tubeless compatible

All PE wheel series are tubeless compatible, if you want to use tubeless tire, we will be equipped with tubeless rim tape and tubeless valve.

详2.jpg

High TG brake surface

The brake surface uses a mixture of 270 degrees Celsius high temperature resin and T800 material, and also adds a drain groove, regardless of dry weather or wet weather, the performance of the brake side has a good performance.

详5.jpg

 

SPECIFICATIONS

PE40
RIM SPOKE
SERIES PE40 FRONT SPOKE PATTERN Radial
RIM TYPE Tubeless compatible REAR SPOKE PATTERN Radial
RIM WIDTH 40mm SPOKE COUNT 18F/21R
INNER WIDTH 19.5mm SPOKE TYPE CS-01
OUTERWIDTH 29mm NIPPLE TYPE Alloy secure lock
HUB OTHER
FRONT HUB Qr*100 ceramic bearing ASSEMBLY METHOD Handbuilt
REAR HUB Qr*130 ceramic bearing EXTRAS Spokes,nipples,skewer, brake pads,rim tape
BRAKE INTERFACE Rim brake WEIGHT F.585g  R.715g
HUB TYPE YAn R28 SYSTEM WEIGHT LIMIT 275lbs / 125kg
CASSETTE BODY SHIMANO RECOMMENDED TYRE SIZES 25 to 32mm
PE50
RIM SPOKE
SERIES PE50 FRONT SPOKE PATTERN Radial
RIM TYPE Tubeless compatible REAR SPOKE PATTERN Radial
RIM WIDTH 50mm SPOKE COUNT 18F/21R
INNER WIDTH 19.5mm SPOKE TYPE CS-01
OUTERWIDTH 29mm NIPPLE TYPE Alloy secure lock
HUB OTHER
FRONT HUB Qr*100 ceramic bearing ASSEMBLY METHOD Handbuilt
REAR HUB Qr*130 ceramic bearing EXTRAS Spokes,nipples,skewer, brake pads,rim tape
BRAKE INTERFACE Rim brake WEIGHT F.619g  R.748g
HUB TYPE YAn R28 SYSTEM WEIGHT LIMIT 275lbs / 125kg
CASSETTE BODY SHIMANO RECOMMENDED TYRE SIZES 25 to 32mm

 

carbon spoke

700c carbon wheelset

TECHNOLOGY

carbon wheel

carbon spoke

CHA/Customized spoke hole angle

All spoke hole angles must be customized according to the geometric angle of the hub.all drilled holes are inspected to ensure they are free of burrs.You can request a customized drilling pattern if you have a unique wheel build.

TRD/Tubeless R angle design

All yuan an bike are tubeless compatible.We design a R angle,The rounded edge makes tire installation easier and offers increased support during hard cornering with a softer edge and larger surface area.

LMS/lighter materials improve the strength

We use lighter materials and make full use of the combination of T700 and T800 to improve the strength.

SIW/smooth Inside Wall

We use a specific, thinner, high-pressure air bladders to control the inner wall smoothness, and the inner wall air bladders can be extracted clean at one time, without residue, not only effectively improve the tightness of the carbon fiber yarn, but also allow the spoke cap to be more tightly integrated with the spoke hole

OPT/one piece technology

Compared to the technology of 3 piece, our one piece tech is more technically difficult and takes longer to produce, but the rigidity of the rim is at least 7% higher

BLT/Bead Lock technology

The bump on the rim bed helps to create a buffer during tire inflation, making the mounting process easier. When the tire is mounted, the raised portion reinforces the tire bead, making it harder to “burp” or fall back into the drop channel.

Leave A Message