|Tire Compatibility||Clincher/ Tubeless|
|Rim Finish||Glossy Marbled|
|Max Tire Pressure||50psi/3.4bar|
|Extras||Rim Tape(Installed), Tubeless Valves(Installed)|
|Weight (Pair)||1486g+(See FAQ Data information)|
|Rider Weight Limit||275lbs/125kg|
|Recommended Tire Sizes||2.2″-2.7″|
|Intended Use||Cross Country / All Mountain|
|Front Hub Spacing||QR x 100mm / 15x100mm / 15x110mm|
|Rear Hub Spacing||QR x 135mm / 12x142mm / 12x148mm|
|Brake Compatibility||Disc (Center Lock/6-bolt)|
|Freehub Type||Ratchet System 36T|
|Freehub Compatibility||Shimano / SRAM XD / Micro Spline|
|Front Spoke Pattern||3X/3X|
|Rear Spoke Pattern||3X/3X|
|Spoke Type||Sapim CX-Ray|
|Nipple Type||Sapim Secure Lock|
all mountain wheels 29ER PRO36
Elitewheels 29ER PRO33 Rims
During the rim production process, internal inflatable bladders from a special material are used to produce smoother walls, resulting in a lighter rim. These bladders are then completely removed without the use of harsh chemicals through the valve hole. Our unique manufacturing process makes is so that the rim does not have to be patched to extract the bladders like traditional manufacturers. This significantly improves the strength of the rims.
Elitewheels 29ER PRO33 Rim type
We use both genuine Toray T700 and T800 carbon fiber which is superior to generic carbon fiber used by many manufacturers. The two types of carbon fiber are used in different places to increase the wheel’s strength to weight ratio while reducing lateral and radial forces as well as increasing impact resistance.
The rims have also been specifically designed to make sealing tubeless tires using a floor pump easy.
Elitewheels 29ER PRO33 Hub
The Elitewheels Pro hub comes standard and features Taiwanese TPI bearings. Both the front and rear hubs are made of 7075 aluminum alloy. The lightweight freebody features a ratchet system with 36 teeth.
DT Swiss hubs are also available.
Elitewheels 29ER PRO33 Spokes
Sapim CX-Ray spokes come standard. We take precautions to ensure that spoke windup is minimized so wheels don’t go out of true. After the initial truing, the wheel is sideloaded. This process is repeated again. The wheels are sideloaded a total of 16 times. We see this as an essential quality control standard. As a result, our wheels are guaranteed to stay within 0.2mm of true.
The 2.8mm spoke offset minimizes the right and left spoke tension difference. This makes for a stonger and more laterally stiff wheel giving you more control.
3 reviews for 29er Pro36